licenserules

HVAC contractor · New Mexico

New Mexico HVAC contractor license requirements

What New Mexico requires before you take paid heating, ventilation and air conditioning work: the license, job size limit, exams, fees, bond and insurance. Checked November 6, 2026 from 15 official sources.

Do I need a license to work as an HVAC contractor in New Mexico?

Yes. You need a state license: MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical).

Issued by Construction Industries Division (CID), New Mexico Regulation and Licensing Department123

Needed from
See limit below
Bond
$10,000
Qualifying party application
$36
Exams
3
Heat pump unit outside a modern house
Job size limit

The $7,200 handyman exemption does not cover gas fitting. CID says replacing a furnace or water heater needs a permit pulled by a New Mexico licensed contractor before the work, and homeowners may not run their own ductwork.45

How to get licensed

  1. 1

    The person who will be the qualifying party sends a qualifying party application, notarized work experience affidavits and the $36 fee to PSI in Albuquerque by hand or mail.213

  2. 2

    After approval, schedule and pass the MM-3 exam(s) and the Business and Law exam with PSI, or take an approved business and law course instead of that exam.29

  3. 3

    The company sends PSI a license application with the $36 fee, the license fee, the $10,000 license bond, a Taxation and Revenue Department registration certificate, state business filing certificates if it is a corporation, LLC or partnership, and the qualifying party's exam scores.21113

  4. 4

    Get workers' compensation coverage, which CID requires for all licensed entities.2

  5. 5

    Workers who do mechanical work need a CID journeyman certificate (such as JR or JSM), applied for through PSI with a $75 fee, and may only work for a contractor licensed for that work.68

  6. 6

    Check a license with the PSI license search.23

What New Mexico requires

Experience

The MM-3 qualifying party needs four years of experience within the 10 years before the application.678

More

Journeyman refrigeration (JR) and sheet metal (JSM) certificates need two years. Accredited training counts as half a year for each year, up to half the requirement.

Exams 3

  • Business and Law

    A business and construction law exam given by PSI, required of all new qualifying party candidates.2479

    More

    An approved business and law course can be taken instead. A passing score is 75% or higher, and a passing score is valid for one year. A candidate may not repeat an exam more than twice in 30 days.

  • Trade exam (MM-3)

    A MM-3 trade exam given by PSI after CID or PSI approves the work experience.29

    More

    Candidates must test within 6 months of becoming eligible. Many CID exams are open book with approved, bound references.

  • Journeyman exams (JR or JSM)

    Journeyman exams given by PSI. The sheet metal exam has a written and a practical part.810

    More

    A JR certificate also needs proof of EPA refrigerant recovery compliance.

Bond $10,000

Every licensed contractor must file a $10,000 bond from a corporate surety authorized in New Mexico, at first licensure and at each renewal.47

More

The bond only pays to fix code violations that CID certifies and the contractor does not correct. Claims must be made within two years of final inspection or of the certificate of occupancy, whichever comes first. Cities may not require an extra license bond.

You pay a yearly premium, not the full amount: about $100–$300 a year with good credit (about 675-700+). Estimate for your credit

Liability insurance

Not published by the agency. Customers and general contractors often ask for proof anyway.

Insurance rules for all New Mexico trades

Workers' compensation

CID says workers' compensation coverage is required for all licensed entities.2713

More

Failing to follow workers' compensation law can make a license invalid.

Renewal

Contractor licenses expire two years after issuance or on a date CID sets, and renewal needs the renewal fee and the signatures of all qualifying parties.471113

More

A license not renewed on time is suspended. A late renewal costs $1 a day for the first 30 days, then the equivalent of one year's fee; after 90 days the license is cancelled and the company must apply again.

Fees

Qualifying party application ($30 application plus $6 certificate per classification)211$36
Contractor license application ($30 application plus $6 certificate)211$36
Business and Law exam9$68.88
MM-3 trade exam9$68.88
License fee per classification, new or renewal (all other single classifications)11$150
Journeyman sheet metal exams (written plus practical)10$137.76
Journeyman certificate application, new or renewal (per classification)1112$75

Good to know

  • MM-3 covers HVAC air handling and refrigeration equipment and piping, packaged units, evaporative coolers, ductwork, and control wiring up to 24 volts.6

    More

    MM-2 covers natural gas piping, gas appliances, boilers and warm-air heating. MM-4 covers hydronic and process piping. MM-98 covers all of them.

  • Journeyman refrigeration and sheet metal certificates need 16 hours of approved continuing education every three years, including 8 hours on the current code.814

  • LP gas work needs a separate LP gas license. Holders of MM-2 or MM-98 can get an LP-04 license from PSI without testing. LP licenses renew every year.5

  • CID licenses business entities, not people. Each license must have a qualifying party who holds a CID certificate for the classification and is at least 18.713

    More

    One person can qualify more than one company only if the companies share at least 30% common ownership.

  • Unlicensed contracting is a misdemeanor. For work worth $5,000 or less the penalty is up to 90 days in jail, a $300 to $500 fine, or both.415

    More

    For more than $5,000 it is up to six months in jail, a fine of 10% of the work's value, or both.

HVAC contractor rules in New Mexico cities

Some places make HVAC contractors get a local license on top of New Mexico's. Find yours below.

Hiring an HVAC contractor in New Mexico?

What to ask for

A current MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical) number, then look it up yourself. New Mexico also requires a bond for this license.

Check a New Mexico license City rules

Common questions

Do I need a license to work as an HVAC contractor in New Mexico?

Yes. New Mexico requires MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical). The $7,200 handyman exemption does not cover gas fitting. CID says replacing a furnace or water heater needs a permit pulled by a New Mexico licensed contractor before the work, and homeowners may not run their own ductwork.

How much does MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical) cost in New Mexico?

Qualifying party application ($30 application plus $6 certificate per classification): $36. Contractor license application ($30 application plus $6 certificate): $36. Business and Law exam: $68.88. MM-3 trade exam: $68.88. License fee per classification, new or renewal (all other single classifications): $150. Journeyman sheet metal exams (written plus practical): $137.76. Journeyman certificate application, new or renewal (per classification): $75.

Is a bond required?

Every licensed contractor must file a $10,000 bond from a corporate surety authorized in New Mexico, at first licensure and at each renewal. The bond only pays to fix code violations that CID certifies and the contractor does not correct. Claims must be made within two years of final inspection or of the certificate of occupancy, whichever comes first. Cities may not require an extra license bond.

What exams do I need to pass?

Business and Law. Trade exam (MM-3). Journeyman exams (JR or JSM).

How often do I renew?

Contractor licenses expire two years after issuance or on a date CID sets, and renewal needs the renewal fee and the signatures of all qualifying parties. A license not renewed on time is suspended. A late renewal costs $1 a day for the first 30 days, then the equivalent of one year's fee; after 90 days the license is cancelled and the company must apply again.

Sources

15 official pages, checked November 6, 2026
  1. Construction Industries - NM Regulation and Licensing Department · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026
  2. Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026
  3. License Management: Search Individual/Company · PSI (licensing and exam vendor for the NM Construction Industries Division) · checked November 6, 2026
  4. Chapter 60 - Business Licenses (Article 13, Construction Industries Licensing Act, Sections 60-13-1 to 60-13-59 NMSA 1978) · New Mexico Compilation Commission (NMOneSource) · checked November 6, 2026
  5. Construction Industry | Frequently Asked Questions · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026
  6. 14.6.6 NMAC - Classifications and Scopes · New Mexico State Records Center and Archives (NMAC) · checked November 6, 2026
  7. 14.6.3 NMAC - Contractor's License Requirements · New Mexico State Records Center and Archives (NMAC) · checked November 6, 2026
  8. 14.6.4 NMAC - Journeyman Certification · New Mexico State Records Center and Archives (NMAC) · checked November 6, 2026
  9. State of New Mexico Contractor Examinations Candidate Information Bulletin · PSI (licensing and exam vendor for the NM Construction Industries Division) · checked November 6, 2026
  10. State of New Mexico Journeyman Examinations Candidate Information Bulletin · PSI (licensing and exam vendor for the NM Construction Industries Division) · checked November 6, 2026
  11. New Mexico Licensing Fees · PSI (licensing and exam vendor for the NM Construction Industries Division) · checked November 6, 2026
  12. Construction Industries Forms and Applications Fees · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026
  13. New Mexico Contractor Licensing Frequently Asked Questions · PSI (licensing and exam vendor for the NM Construction Industries Division) · checked November 6, 2026
  14. Continuing Education for Construction Industries Bureau · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026
  15. Unlicensed Violations | Investigation and Enforcement · New Mexico Regulation and Licensing Department, Construction Industries Division · checked November 6, 2026

Rules change. Confirm with the agency before you bid or start work. How we research

Other trades in New Mexico

HVAC contractor licenses in other states

Birmingham, Alabama skyline by the water Alabama Certified Heating and Air Conditioning Contractor or Refrigeration Contractor Phoenix from above with mountains in the background Arizona R-39, C-39 or CR-39 Air Conditioning and Refrigeration Little Rock, Arkansas skyline at night Arkansas HVACR Class A, B, D or E license (HVACR Licensing Board) Houses and palm trees on a California street California C-20 Warm-Air Heating, Ventilating and Air-Conditioning Contractor New England house among green trees in Connecticut Connecticut S-1 Unlimited Heating, Piping and Cooling Contractor (S-2 Journeyperson); limited types such as D-1/D-2 Warm Air, Air Conditioning and Refrigeration Brick building among green trees in Wilmington, Delaware Delaware Master HVACR or Master HVACR Restricted License (Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners) Row houses in Washington, DC with a flag on the porch District of Columbia Master Refrigeration and Air Conditioning Mechanic and Refrigeration and Air Conditioning Contractor (Board of Industrial Trades) Suburban Florida street with palm trees Florida Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM Atlanta buildings from above Georgia Conditioned Air Contractor Class I or Conditioned Air Contractor Class II Honolulu buildings from above Hawaii C-52 Ventilating and Air Conditioning Contractor Boise, Idaho skyline under a blue sky Idaho HVAC contractor and journeyman certificates of competency Chicago buildings along the river Illinois No state license. Cities or counties may license it Indianapolis skyline under a blue sky Indiana No state license. Cities or counties may license it Des Moines, Iowa buildings from above Iowa Mechanical contractor license, with Master and Journeyperson HVAC-refrigeration, hydronic, mechanical or sheet metal licenses for individuals Wichita, Kansas river and bridge from above Kansas No state license. Cities or counties may license it Louisville skyline across the Ohio River Kentucky Master HVAC Contractor license (Journeyman HVAC Mechanic license for workers) Yellow house with green shutters in New Orleans Louisiana Mechanical classification, or the Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration subclassification (LSLBC) Portland Head Light on the Maine coast Maine Oil Burner, Solid Fuel, or Propane and Natural Gas Technician (Maine Fuel Board) Baltimore skyline across the harbor Maryland Master HVACR Contractor License (State Board of HVACR Contractors) Boston skyline across the harbor Massachusetts Sheet Metal Worker license (journeyperson or master) for ductwork; Refrigeration Technician license for refrigeration over 10 tons Detroit skyline reflected in the river at dusk Michigan Mechanical Contractor License (HVAC equipment and other work classifications) Minneapolis skyline at night Minnesota Mechanical contractor bond filing (no state HVAC license) Downtown Jackson, Mississippi buildings Mississippi Heat, Ventilation, A/C (HVAC) specialty or Mechanical major classification (commercial); Residential HVAC or Residential Mechanical license Omaha, Nebraska skyline across a lake Nebraska No state license. Cities or counties may license it Las Vegas buildings from above Nevada C-21 Refrigeration and Air-Conditioning (C-21b Air-Conditioning); C-1f for heating and evaporative cooling Small New Hampshire town with a church steeple from above New Hampshire Fuel Gas Installation Technician or Fuel Gas Service Technician license (gas equipment) Jersey City skyline across the water New Jersey Master HVACR Contractor License Charlotte, North Carolina from above North Carolina Heating Contractor license (Heating Group 1, 2 or 3; Class I or Class II) Columbus, Ohio skyline and bridge over the river Ohio HVAC Contractor (OCILB) Oklahoma City skyline by the river Oklahoma Mechanical Contractor License (HVAC/R Unlimited or Limited) Portland, Oregon with Mount Hood behind it Oregon CCB contractor license; electrical HVAC work also needs a BCD Restricted Energy Contractor (CRE) or Limited Maintenance Specialty Contractor HVAC/R (LHR) license Philadelphia skyline at dusk Pennsylvania Home Improvement Contractor Registration (HICPA) Providence, Rhode Island skyline Rhode Island Refrigeration/Air Conditioning Master and Journeyperson; Pipefitter Master and Journeyperson; Sheet Metal Contractor and Journeyperson Historic street in Charleston, South Carolina South Carolina Residential HVAC Installer and Repairer license (Residential Builders Commission); Mechanical Contractor license, Air Conditioning, Heating or Packaged Equipment classification (Contractor's Licensing Board) Nashville skyline by the river at sunset Tennessee Contractor license with CMC-C HVAC, Refrigeration and Gas Piping classification Brick two-story house in Texas Texas Air Conditioning and Refrigeration Contractor License (Class A or Class B) Salt Lake City skyline below the mountains Utah H100 HVAC Contractor Richmond, Virginia skyline and bridge at night Virginia Class A, B or C contractor license with the HVAC (HVA) classification, qualified by a Master HVAC tradesman license Seattle skyline with Mount Rainier behind it Washington Specialty contractor registration (Heating, ventilation, air-conditioning and refrigeration (HVAC/R), code SM) West Virginia town surrounded by trees West Virginia HVAC Technician, HVAC Residential Technician or Technician-in-Training license (Division of Labor); Heating, Ventilating and Cooling Contractor license (Contractor Licensing Board) Milwaukee skyline across the water Wisconsin HVAC Contractor registration (business); HVAC Qualifier certification (optional, individual)