HVAC contractor · Florida
Florida HVAC contractor license requirements
What Florida requires before you take paid heating, ventilation and air conditioning work: the license, job size limit, exams, fees, bond and insurance. Checked November 5, 2026 from 12 official sources.
Do I need a license to work as an HVAC contractor in Florida?
Yes. You need a state license: Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM.
Issued by Construction Industry Licensing Board (CILB), Florida Department of Business and Professional Regulation (DBPR)12
- Needed from
- $2,500
- Bond
- None listed
- Renewal fee per license
- $205
- Exams
- 2
A license is not needed for casual, minor or inconsequential work with a total contract price under $2,500, unless the work is part of a larger project, the job was split to stay under the limit, or the person advertises as a contractor.3
More
Selling, servicing or installing ductless heating or air-conditioning units of 3 tons (36,000 Btu) or less with a factory-installed cord and plug is also exempt.
How to get licensed
- 1
- 2
- 3
Apply to DBPR for certification.1
What Florida requires
Experience
Applicants must be at least 18. Experience options are four years as a worker or foreman with at least one year as a foreman; a mix of foreman or worker experience and accredited college credits; or a bachelor's degree plus one year of experience (mechanical engineering is accepted for mechanical and Class A and B air-conditioning). A Class B contractor can move to Class A with one year of experience.45
Bond
The state does not publish a bond requirement for this work.
Liability insurance
Active air-conditioning and mechanical contractors must carry at least $100,000 public liability and $25,000 property damage insurance.8
Renewal
Certified licenses expire August 31 of even years; registered licenses expire August 31 of odd years. Renewal requires 14 hours of continuing education.1
Fees
Good to know
Class A air-conditioning is unlimited in size. Class B is limited to systems of 25 tons cooling and 500,000 Btu heating.12
More
Class C (servicing only) was issued only to those certified before October 1, 1988. A mechanical contractor's scope also covers gas and fuel piping inside buildings.
Sheet metal contractors (CS) are a separate category that covers air-handling ductwork and balancing.12
We did not check the air-conditioning or mechanical certification application forms, so the initial certification fee is not listed here.1
HVAC contractor rules in Florida cities
Some places make HVAC contractors get a local license on top of Florida's. Find yours below.
- Broward CountyLocal license required
- Collier CountyLocal license required (1 of 2 types)
- CrestviewNo local license for this trade
- DestinNo local license for this trade
- Fort Walton BeachNo local license for this trade
- Hillsborough CountyNo local license for this trade
- JacksonvilleLocal license required (1 of 2 types)
- Miami-Dade CountyLocal license required
- Orange CountyContractor registration; trades not listed
- Palm Beach CountyLocal license required
- Panama CityNo local license for this trade
- TallahasseeLocal license required
No match. Your city may not be on the site yet. Check with its building department.
Hiring an HVAC contractor in Florida?
What to ask for
A current Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM number, then look it up yourself.
Common questions
Do I need a license to work as an HVAC contractor in Florida?
Yes. Florida requires Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM. A license is not needed for casual, minor or inconsequential work with a total contract price under $2,500, unless the work is part of a larger project, the job was split to stay under the limit, or the person advertises as a contractor. Selling, servicing or installing ductless heating or air-conditioning units of 3 tons (36,000 Btu) or less with a factory-installed cord and plug is also exempt.
How much does Certified Class A or Class B Air-Conditioning Contractor (CA) or Certified Mechanical Contractor (CM); registered versions RA and RM cost in Florida?
Exam registration fee (paid to Professional Testing, Inc.): $135. Business and Finance exam (paid to Pearson VUE): $80. Trade knowledge exam (paid to Pearson VUE): $80. Renewal fee per license (plus $50 per qualified business): $205.
What exams do I need to pass?
Business and Finance. Trade knowledge.
How often do I renew?
Certified licenses expire August 31 of even years; registered licenses expire August 31 of odd years. Renewal requires 14 hours of continuing education.
Sources
12 official pages, checked November 5, 2026
- Construction Industry · Florida Department of Business and Professional Regulation · checked November 5, 2026
- Licensing Portal - License Search · Florida Department of Business and Professional Regulation · checked November 5, 2026
- The 2026 Florida Statutes, 489.103 Exemptions · Florida Legislature · checked November 5, 2026
- The 2026 Florida Statutes, 489.111 Licensure by examination · Florida Legislature · checked November 5, 2026
- Rule 61G4-15.001, F.A.C., Qualification for Certification · Florida Department of State, Florida Administrative Code · checked November 5, 2026
- Candidate Information Booklet: Construction Licensure Examinations (Excluding Plumbing), Effective July 2024 · Florida Department of Business and Professional Regulation, Bureau of Education and Testing · checked November 5, 2026
- Florida State Construction Examination: Examination Registration Instructions and Application 2026 (Revised 05/12/2026) · Florida Department of Business and Professional Regulation, Bureau of Education and Testing · checked November 5, 2026
- Rule 61G4-15.003, F.A.C., Public Liability Insurance · Florida Department of State, Florida Administrative Code · checked November 5, 2026
- Coverage Requirements · Florida Department of Financial Services, Division of Workers' Compensation · checked November 5, 2026
- Construction Industry (exemptions) · Florida Department of Financial Services, Division of Workers' Compensation · checked November 5, 2026
- Rule 61G4-15.006, F.A.C., Financial Responsibility and Financial Stability, Grounds for Denial · Florida Department of State, Florida Administrative Code · checked November 5, 2026
- The 2026 Florida Statutes, 489.105 Definitions · Florida Legislature · checked November 5, 2026
Rules change. Confirm with the agency before you bid or start work. How we research
Other trades in Florida
General contractor
Certified General Contractor (CG) or Registered General Contractor (RG)
Residential builder
Certified Residential Contractor (CR) or Registered Residential Contractor (RR); Certified Building Contractor (CB) also covers residential work
Electrician
Certified Electrical Contractor (EC) or Registered Electrical Contractor (ER)
Plumber
Certified Plumbing Contractor (CF) or Registered Plumbing Contractor (RF)
Roofer
Certified Roofing Contractor (CC) or Registered Roofing Contractor (RC)
Painter
No state license for this work
Handyman
No state license for this work
Flooring contractor
No state license for this work
Demolition contractor
Certified Building Demolition Specialty Contractor, or a general, building or residential contractor
Pool and spa contractor
Certified Commercial Pool/Spa, Residential Pool/Spa, or Swimming Pool/Spa Servicing Contractor (CP); registered version RP
Solar installer
Certified Solar Contractor (CV) or Registered Solar Contractor (RV)
Fence contractor
No state license. Cities or counties may license it
Pest control
Pest Control Business License, with a Certified Pest Control Operator in charge
Home inspector
Home Inspector License (HI)
HVAC contractor licenses in other states
Alabama
Certified Heating and Air Conditioning Contractor or Refrigeration Contractor
Arizona
R-39, C-39 or CR-39 Air Conditioning and Refrigeration
Arkansas
HVACR Class A, B, D or E license (HVACR Licensing Board)
California
C-20 Warm-Air Heating, Ventilating and Air-Conditioning Contractor
Connecticut
S-1 Unlimited Heating, Piping and Cooling Contractor (S-2 Journeyperson); limited types such as D-1/D-2 Warm Air, Air Conditioning and Refrigeration
Delaware
Master HVACR or Master HVACR Restricted License (Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners)
District of Columbia
Master Refrigeration and Air Conditioning Mechanic and Refrigeration and Air Conditioning Contractor (Board of Industrial Trades)
Georgia
Conditioned Air Contractor Class I or Conditioned Air Contractor Class II
Hawaii
C-52 Ventilating and Air Conditioning Contractor
Idaho
HVAC contractor and journeyman certificates of competency
Illinois
No state license. Cities or counties may license it
Indiana
No state license. Cities or counties may license it
Iowa
Mechanical contractor license, with Master and Journeyperson HVAC-refrigeration, hydronic, mechanical or sheet metal licenses for individuals
Kansas
No state license. Cities or counties may license it
Kentucky
Master HVAC Contractor license (Journeyman HVAC Mechanic license for workers)
Louisiana
Mechanical classification, or the Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration subclassification (LSLBC)
Maine
Oil Burner, Solid Fuel, or Propane and Natural Gas Technician (Maine Fuel Board)
Maryland
Master HVACR Contractor License (State Board of HVACR Contractors)
Massachusetts
Sheet Metal Worker license (journeyperson or master) for ductwork; Refrigeration Technician license for refrigeration over 10 tons
Michigan
Mechanical Contractor License (HVAC equipment and other work classifications)
Minnesota
Mechanical contractor bond filing (no state HVAC license)
Mississippi
Heat, Ventilation, A/C (HVAC) specialty or Mechanical major classification (commercial); Residential HVAC or Residential Mechanical license
Nebraska
No state license. Cities or counties may license it
Nevada
C-21 Refrigeration and Air-Conditioning (C-21b Air-Conditioning); C-1f for heating and evaporative cooling
New Hampshire
Fuel Gas Installation Technician or Fuel Gas Service Technician license (gas equipment)
New Jersey
Master HVACR Contractor License
New Mexico
MM-3 Heating, Ventilation and Air Conditioning (or MM-98 Mechanical)
North Carolina
Heating Contractor license (Heating Group 1, 2 or 3; Class I or Class II)
Ohio
HVAC Contractor (OCILB)
Oklahoma
Mechanical Contractor License (HVAC/R Unlimited or Limited)
Oregon
CCB contractor license; electrical HVAC work also needs a BCD Restricted Energy Contractor (CRE) or Limited Maintenance Specialty Contractor HVAC/R (LHR) license
Pennsylvania
Home Improvement Contractor Registration (HICPA)
Rhode Island
Refrigeration/Air Conditioning Master and Journeyperson; Pipefitter Master and Journeyperson; Sheet Metal Contractor and Journeyperson
South Carolina
Residential HVAC Installer and Repairer license (Residential Builders Commission); Mechanical Contractor license, Air Conditioning, Heating or Packaged Equipment classification (Contractor's Licensing Board)
Tennessee
Contractor license with CMC-C HVAC, Refrigeration and Gas Piping classification
Texas
Air Conditioning and Refrigeration Contractor License (Class A or Class B)
Utah
H100 HVAC Contractor
Virginia
Class A, B or C contractor license with the HVAC (HVA) classification, qualified by a Master HVAC tradesman license
Washington
Specialty contractor registration (Heating, ventilation, air-conditioning and refrigeration (HVAC/R), code SM)
West Virginia
HVAC Technician, HVAC Residential Technician or Technician-in-Training license (Division of Labor); Heating, Ventilating and Cooling Contractor license (Contractor Licensing Board)
Wisconsin
HVAC Contractor registration (business); HVAC Qualifier certification (optional, individual)