Minneapolis, MN · Local contractor rules
Contractor license requirements in Minneapolis, Minnesota
What Minneapolis requires before you work there, on top of Minnesota state licensing. Checked November 6, 2026 from 14 official sources.
Do I need a Minneapolis license to work there?
Yes. You need one Minneapolis license. Which one depends on the work you do.
Minneapolis issues its own trade licenses for building wreckers, gas fitters, HVAC (Class A and Class B), oil burner installers, plumbers, refrigeration systems installers, residential specialty contractors, sign hangers and painters, billboard erectors and steam and hot water systems installers. Tree servicing also needs a city license.13
Minneapolis has 9 license types. You need only the one that fits your work:
Residential Specialty Contractor license For: Residential builder, painter, flooring contractor, concrete contractor, pool and spa contractor, handyman FeeNot publishedBond$10,000 HVAC Class A license For: HVAC contractor FeeNot publishedBond$25,000 Duct Cleaner (HVAC Class B) license For: HVAC contractor FeeNot publishedBond$25,000 Gas Fitter license For: HVAC contractor, plumber FeeNot publishedBond$25,000 Plumber license For: Plumber FeeNot publishedBond$25,000 Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses For: HVAC contractor FeeNot publishedBond$25,000 Building Wrecker license (Class A or Class B) For: Demolition contractor FeeNot publishedBondNot listed Tree Servicing license For: Tree service FeeNot publishedBondNot listed Competency Card (masters and journeymen) For: Plumber, HVAC contractor Fee$30BondNot listedThis is on top of the Minnesota state license, if your trade has one. Check your trade
Pick your trade
Find your work below. Each row shows whether you need a Minnesota state license and which Minneapolis license is yours. Open a row for the full checklist.
How to start working in Minneapolis
- 1
Get your Minnesota license if your trade needs one
Minnesota licenses some trades and not others. The trade list above shows the state rule for yours.
- 2
Get a surety bond
- Residential Specialty Contractor license$10,000
- HVAC Class A license$25,000
- Duct Cleaner (HVAC Class B) license$25,000
- Gas Fitter license$25,000
- Plumber license$25,000
- Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses$25,000
You pay a yearly premium to a surety company, not the full bond amount. Estimate the cost
- 3
Get a certificate of insurance
The minimums depend on which license you get. They are listed in each license below.
- 4
Apply for your Minneapolis license
Apply for the one that fits your work, with City of Minneapolis Business Licenses & Consumer Services.
- Residential Specialty Contractor licenseNot published
- HVAC Class A licenseNot published
- Duct Cleaner (HVAC Class B) licenseNot published
- Gas Fitter licenseNot published
- Plumber licenseNot published
- Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licensesNot published
- Building Wrecker license (Class A or Class B)Not published
- Tree Servicing licenseNot published
- Competency Card (masters and journeymen)$30
- 5
Pull a permit for each job
Homeowners and contractors can apply for construction permits.13
More
A contractor applying for a building permit must show a city residential specialty contractor license or a state residential building contractor, residential remodeler or residential roofer license.
- 6
Renew on time
The license expires December 1.
Details for each Minneapolis license type
You need only one of these: the one that fits your work.
Residential Specialty Contractor license Residential builderPainterFlooring contractorConcrete contractorPool and spa contractorHandyman Fee— Bond$10,000
Who needs it
A contractor or remodeler who owns or runs the business, negotiates contracts with owners and works in one special skill on homes with 1 to 4 units.56
More
The license covers one discipline: carpentry, drywall and plaster, excavation, exterior finishing, general installation specialties (such as garage doors, pools, spas and hot tubs, fireplaces and asphalt paving), interior finishing (such as floor covering, tile and painting) or masonry and concrete.
What you need
The application is signed by an owner, partner or principal and must include the license fee plus a new license processing charge.6
Insurance
General liability covering premises, operations and products, with at least $100,000 per occurrence and $300,000 aggregate for bodily injury and $10,000 for property damage.6
Renewal
The license expires December 1.6
HVAC Class A license HVAC contractor Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.4
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.4
Renewal
Trade licenses expire December 1.4
Duct Cleaner (HVAC Class B) license HVAC contractor Fee— Bond$25,000
Who needs it
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.4
Renewal
Trade licenses expire December 1.4
Gas Fitter license HVAC contractorPlumber Fee— Bond$25,000
What you need
A Minneapolis Master Competency Card.4
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.4
Renewal
Trade licenses expire December 1.4
Plumber license Plumber Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.4
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.4
Renewal
Trade licenses expire December 1.4
Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses HVAC contractor Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.4
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.4
Renewal
Trade licenses expire December 1.4
Building Wrecker license (Class A or Class B) Demolition contractor Fee— Bond—
Who needs it
Fees and bond
A City of Minneapolis bond of $50,000 for Class A or $10,000 for Class B.
Insurance
Class A: $1,500,000 per occurrence for bodily injury and $150,000 per occurrence for property damage.4
More
Class B: $300,000 per occurrence for bodily injury and $50,000 per occurrence for property damage. No explosion or collapse exceptions, and Minneapolis must be named on the certificate.
Renewal
Trade licenses expire December 1.4
Tree Servicing license Tree service Fee— Bond—
Who needs it
Anyone who cuts, trims, removes, chips, grinds or hauls trees, limbs, stumps or roots two inches or more wide, or applies pesticides to trees, in Minneapolis.11
More
A business with a city solid waste license does not need this license just to remove tree parts from a property.
Competency Card (masters and journeymen) PlumberHVAC contractor Fee$30 Bond—
Who needs it
Masters and journeymen in fuel gas fitting, plumbing (gas specific), refrigeration, warm air and ventilation, and steam and hot water need a card to work in Minneapolis.12
What you need
At least four years of work experience before applying, and a city exam after the Building Official approves eligibility.12
More
Mechanical trades also need at least 576 hours of trade-related education. Plumbing/gas specific applicants need a state plumbing license at the same level and at least 1,600 hours of fuel gas experience or training.
Test scores are valid for one year. After a failed exam there is a 60-day wait before retesting.12
Holders of a City of Saint Paul Certificate of Competency can get a Minneapolis card by sending a copy of the St. Paul card and the fee.12
Fees and bond
Gas fitter, HVAC Class A, oil burner, plumber, refrigeration and steam and hot water licenses each require a Minneapolis Master Competency Card and a $25,000 State of Minnesota bond.4
Except for sign hangers, a business applying for a trade license must be located in Minnesota and have a Minnesota address. All license holders must be at least 18 years old.4
Trade licenses expire on December 1, and no license is issued for longer than one year.4
For homeowners
Can I do the work and pull the permit myself?
A person who owns and lives in a unit of a 1- to 4-unit dwelling can get a permit to do their own construction work, with a valid photo ID.13
More
An owner who lives in a single-family home can do their own plumbing or mechanical work but may not work on gas-fired heating equipment. Corporations, LLCs and partnerships cannot get owner permits. An owner who builds or improves more than one property in 24 months needs a state residential building contractor or remodeler license.
Check a contractor before you hire
Minneapolis requires contractors to hold one of the local licenses above and a bond and insurance. Ask for a copy of each.
Good to know
The city publishes lists of licensed residential specialty, mechanical and heating, plumbing, sign, solid waste and wrecking contractors. Solid waste contractors haul construction and demolition debris.2
Common questions
Do I need a contractor license to work in Minneapolis?
Yes. Minneapolis has 9 license types (Residential Specialty Contractor license; HVAC Class A license; Duct Cleaner (HVAC Class B) license; Gas Fitter license; Plumber license; Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses; Building Wrecker license (Class A or Class B); Tree Servicing license; Competency Card (masters and journeymen)). You need the one that fits your work, plus any Minnesota license your trade needs.
How much does a Minneapolis contractor license cost?
It depends on the license type. Competency Card (masters and journeymen): $30 (card fee, per trade).
Do Minneapolis contractors need a bond?
Yes, and the amount depends on the license type. Residential Specialty Contractor license: $10,000 bond. HVAC Class A license: $25,000 bond. Duct Cleaner (HVAC Class B) license: $25,000 bond. Gas Fitter license: $25,000 bond. Plumber license: $25,000 bond. Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses: $25,000 bond.
Can a homeowner pull a permit in Minneapolis?
A person who owns and lives in a unit of a 1- to 4-unit dwelling can get a permit to do their own construction work, with a valid photo ID. An owner who lives in a single-family home can do their own plumbing or mechanical work but may not work on gas-fired heating equipment. Corporations, LLCs and partnerships cannot get owner permits. An owner who builds or improves more than one property in 24 months needs a state residential building contractor or remodeler license.
How long is a Minneapolis contractor license good for?
The license expires December 1.
Sources
14 official pages, checked November 6, 2026
- Contractor licenses · City of Minneapolis · checked 2026-11-06
- Licensed contractors · City of Minneapolis · checked 2026-11-06
- Trade licenses · City of Minneapolis · checked 2026-11-06
- License Application: Trades (last updated 7/30/26) · City of Minneapolis Licenses and Consumer Services · checked 2026-11-06
- Residential specialty contractor license · City of Minneapolis · checked 2026-11-06
- License Application: Residential Specialty Contractor (last updated 2/22/25) · City of Minneapolis Licenses and Consumer Services · checked 2026-11-06
- HVAC Class A or B license · City of Minneapolis · checked 2026-11-06
- Gas fitter license · City of Minneapolis · checked 2026-11-06
- Plumbing license · City of Minneapolis · checked 2026-11-06
- Building wrecker license · City of Minneapolis · checked 2026-11-06
- Tree servicing license · City of Minneapolis · checked 2026-11-06
- Competency cards · City of Minneapolis · checked 2026-11-06
- Construction permit applicants · City of Minneapolis · checked 2026-11-06
- License fees · City of Minneapolis · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research