licenserules

Rochester, MN · Local contractor rules

Contractor license requirements in Rochester, Minnesota

What Rochester requires before you work there, on top of Minnesota state licensing. Checked November 6, 2026 from 3 official sources.

Do I need a Rochester license to work there?

Yes. You need one Rochester license. Which one depends on the work you do.

Rochester issues its own licenses to HVAC contractors, HVAC master installers, sewer and drain contractors, sidewalk and driveway contractors (asphalt and cement), sign erectors and tree care contractors.1

This is on top of the Minnesota state license, if your trade has one. Check your trade

Pick your trade

Find your work below. Each row shows whether you need a Minnesota state license and which Rochester license is yours. Open a row for the full checklist.

Trades without a Rochester license

Rochester has no city license for general or residential building contractors.12

More

City code Chapter 4-1 requires residential building contractors to be licensed by the State of Minnesota, and license and registration status is checked when a permit is applied for.

How to start working in Rochester

  1. 1

    Get your Minnesota license if your trade needs one

    Minnesota licenses some trades and not others. The trade list above shows the state rule for yours.

  2. 2

    Apply for your Rochester license

    Apply for the one that fits your work, with City of Rochester City Clerk's Office (trade and contractor licenses) and Community Development / Building Safety (permits).

    • HVAC Contractor license$125
    • HVAC Master Installer license$60
    • Sewer and Drain contractor license$90
    • Sidewalk and Driveway contractor license (asphalt and cement)$90
    • Tree Care contractor license$90
    • Sign Erector license$90

    What each license needs

  3. 3

    Business license or tax registration

    Rochester has no general business license. Only certain types of businesses need a city license.3

  4. 4

    Pull a permit for each job

    Building and trade permits are applied for through Accela Citizen Access.2

    More

    Since May 1, 2025, residential re-roofing, re-siding and window replacement need a building permit and inspections, and contractors doing that work need a state license or registration.

    Open the Rochester permit portal

  5. 5

    Renew on time

    All city trade and contractor licenses expire on December 31 and are renewed through the Citizen Access portal.

Details for each Rochester license type

You need only one of these: the one that fits your work.

HVAC Contractor license HVAC contractor Fee$125 Bond—

Who needs it

Contractors who install or work on heating, ventilating and air conditioning systems, including warm air, steam and hot water heating, chilled water cooling, ventilation, refrigeration, gas and oil burners and piping, chimneys and vents, electric space heating, fireplaces and stoves. Licensed under Rochester Code of Ordinances Chapter 4-3.1

What you need

  • At least one licensed master installer employed full time. The contractor license can be filed with a master installer application but is not approved until the master installer license is approved.1

  • HVAC licenses must be approved by the City Council. Complete applications are due by 10 a.m. on the Wednesday before the Council meeting.1

Fees and bond

HVAC Contractor license1$125

Renewal

All city trade and contractor licenses expire on December 31 and are renewed through the Citizen Access portal.1

Apply on the official site
HVAC Master Installer license HVAC contractor Fee$60 Bond—

Who needs it

Individuals who prepare plans for, lay out and supervise the installation, repair and maintenance of heating, ventilating, gas piping, fireplace or air conditioning equipment. The license is issued to the individual, not the employer.1

What you need

  • A certificate of competency from the City of Rochester Building Safety Department, applied for directly with Building Safety.1

  • The application must be signed by the individual, and the license is mailed to the applicant's home address.1

Fees and bond

Master Installer license1$60
Certificate of competency, per area of competency1$25

Renewal

All city trade and contractor licenses expire on December 31.1

Apply on the official site
Sewer and Drain contractor license Fee$90 Bond—

Who needs it

Contractors working on sewers and drains in the city, under Rochester Code of Ordinances Chapter 12-2.1

What you need

  • After approval, licensed contractors request sewer and drain permits from Public Works by filing a notarized Authorized Permit Requesters form.1

Fees and bond

Annual license (not prorated)1$90

Renewal

Annual license that expires December 31. Renewals received after December 31 pay an extra 50% expired-license fee.1

Apply on the official site
Sidewalk and Driveway contractor license (asphalt and cement) Concrete contractor Fee$90 Bond—

Who needs it

Contractors working on sidewalks, curbs, gutters and driveways in the city, under Rochester Code of Ordinances Chapter 9-18.1

More

Asphalt work and cement work each need a separate license and application.

What you need

  • After approval, licensed contractors request sidewalk and driveway permits from Public Works by filing a notarized Authorized Permit Requester form.1

Fees and bond

Annual license (not prorated)1$90

Renewal

Annual license that expires December 31. Renewals received after December 31 pay an extra 50% expired-license fee.1

Apply on the official site
Tree Care contractor license Tree service Fee$90 Bond—

Who needs it

Tree care contractors, under Rochester Code of Ordinances Chapter 5-17.1

What you need

  • A complete application must be approved by the Director of Parks and Recreation or the City Forester before the license is issued.1

Fees and bond

Annual license (not prorated)1$90

Renewal

Annual license that expires December 31. Renewals received after December 31 pay an extra 50% expired-license fee.1

Apply on the official site
Sign Erector license Fee$90 Bond—

Who needs it

Contractors who erect or maintain signs in the city, under Rochester Code of Ordinances Chapter 5-8.1

Fees and bond

Annual license (not prorated)1$90

Renewal

Annual license that expires December 31. Renewals received after December 31 pay an extra 50% expired-license fee.1

Apply on the official site
  • Electricians, plumbers and residential building contractors are licensed by the State of Minnesota, not the city.12

    More

    City code requires electricians and plumbers to provide bonding and/or insurance (and plumbers proof of a state license) to get permits.

  • Trade and contractor license applications and renewals are filed online through the Citizen Access portal. All city trade and contractor licenses expire on December 31.1

For homeowners

Can I do the work and pull the permit myself?

Owners and occupants of single-family homes must get permits for work they do themselves, and the person who signs the permit is responsible for code compliance.2

More

Homeowners do not need a state license to do their own re-roofing, re-siding or window replacement. Landlords may do carpentry work on their rental properties but must hire professional contractors for any trade work.

Check a contractor before you hire

Rochester requires contractors to hold one of the local licenses above. Ask for a copy of each.

Check a Minnesota license

Good to know

  • The city code is hosted on Municode, which was not read because its robots.txt disallows ClaudeBot. Facts here come from the city's licensing and permit pages.1

  • Paper applications go to the City Clerk's Office, 201 4th St SE, Room 135, Rochester.12

    More

    Building Safety and Community Development can be reached at 507-328-2600.

Common questions

Do I need a contractor license to work in Rochester?

Yes. Rochester has 6 license types (HVAC Contractor license; HVAC Master Installer license; Sewer and Drain contractor license; Sidewalk and Driveway contractor license (asphalt and cement); Tree Care contractor license; Sign Erector license). You need the one that fits your work, plus any Minnesota license your trade needs.

How much does a Rochester contractor license cost?

It depends on the license type. HVAC Contractor license: $125 (hvac contractor license). HVAC Master Installer license: $60 (master installer license). Sewer and Drain contractor license: $90 (annual license (not prorated)). Sidewalk and Driveway contractor license (asphalt and cement): $90 (annual license (not prorated)). Tree Care contractor license: $90 (annual license (not prorated)). Sign Erector license: $90 (annual license (not prorated)).

Can a homeowner pull a permit in Rochester?

Owners and occupants of single-family homes must get permits for work they do themselves, and the person who signs the permit is responsible for code compliance. Homeowners do not need a state license to do their own re-roofing, re-siding or window replacement. Landlords may do carpentry work on their rental properties but must hire professional contractors for any trade work.

How long is a Rochester contractor license good for?

All city trade and contractor licenses expire on December 31 and are renewed through the Citizen Access portal.

Sources

3 official pages, checked November 6, 2026
  1. Trade & Contractor Licenses · City of Rochester, Minnesota · checked 2026-11-06
  2. Building Permits · City of Rochester, Minnesota · checked 2026-11-06
  3. Business Licenses · City of Rochester, Minnesota · checked 2026-11-06

Rules change. Confirm with the agency before you bid or start work. How we research

Other places in Minnesota