HVAC contractor · Minneapolis, MN
HVAC contractor license requirements in Minneapolis, Minnesota
Everything an HVAC contractor needs to work legally in Minneapolis: the Minnesota state rule and the local licenses. Checked November 6, 2026 from 10 official sources.
What does an HVAC contractor need to work in Minneapolis?
You need two licenses: one from Minnesota and one from Minneapolis.
Minneapolis has 5 license types that cover this trade. You need only the one that fits your work. Each is described below.
- Minneapolis fee
- $30
- Minneapolis bond
- $25,000
- Minnesota bond
- $25,000
- Insurance
- Proof required
Steps to work as an HVAC contractor in Minneapolis
- 1
Get the Minnesota Mechanical contractor bond filing (no state HVAC license)
- 2
Get your surety bonds
- Minnesota state bond6$25,000
- Minneapolis HVAC Class A license12$25,000
- Minneapolis Duct Cleaner (HVAC Class B) license2$25,000
- Minneapolis Gas Fitter license23$25,000
- Minneapolis Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses2$25,000
You pay a yearly premium, not the full bond amount. Estimate the cost
- 3
Get a certificate of insurance
The minimums depend on which license you get. They are listed in each license below.
- 4
Apply for your Minneapolis license
Apply for the one that fits your work.
- HVAC Class A licenseNot published
- Duct Cleaner (HVAC Class B) licenseNot published
- Gas Fitter licenseNot published
- Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licensesNot published
- Competency Card (masters and journeymen) · card fee, per trade5$30
- 5
Pull a permit for each job
Homeowners and contractors can apply for construction permits.10
More
A contractor applying for a building permit must show a city residential specialty contractor license or a state residential building contractor, residential remodeler or residential roofer license.
The 5 Minneapolis license types (you need one)
HVAC Class A license HVAC contractor Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.2
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Duct Cleaner (HVAC Class B) license HVAC contractor Fee— Bond$25,000
Who needs it
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Gas Fitter license HVAC contractorPlumber Fee— Bond$25,000
What you need
A Minneapolis Master Competency Card.2
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses HVAC contractor Fee— Bond$25,000
Who needs it
What you need
A Minneapolis Master Competency Card.2
Insurance
$100,000/$300,000 for bodily injury and $300,000 for property damage.2
Renewal
Trade licenses expire December 1.2
Competency Card (masters and journeymen) PlumberHVAC contractor Fee$30 Bond—
Who needs it
Masters and journeymen in fuel gas fitting, plumbing (gas specific), refrigeration, warm air and ventilation, and steam and hot water need a card to work in Minneapolis.5
What you need
At least four years of work experience before applying, and a city exam after the Building Official approves eligibility.5
More
Mechanical trades also need at least 576 hours of trade-related education. Plumbing/gas specific applicants need a state plumbing license at the same level and at least 1,600 hours of fuel gas experience or training.
Test scores are valid for one year. After a failed exam there is a 60-day wait before retesting.5
Holders of a City of Saint Paul Certificate of Competency can get a Minneapolis card by sending a copy of the St. Paul card and the fee.5
Fees and bond
Minnesota rules in short
State license
Mechanical contractor bond filing (no state HVAC license). Full Minnesota requirements
State bond
A business must file a $25,000 mechanical contractor bond with DLI before contracting to do gas, heating, ventilation, cooling, air conditioning, fuel burning or refrigeration work.6
More
The bond must be on DLI's form, written by a surety licensed in Minnesota, and properly signed and notarized.
Hiring an HVAC contractor in Minneapolis?
What to ask for
A current Minnesota Mechanical contractor bond filing (no state HVAC license), the Minneapolis HVAC Class A license or Duct Cleaner (HVAC Class B) license or Gas Fitter license or Oil Burner, Refrigeration Systems Installer and Steam and Hot Water licenses or Competency Card (masters and journeymen), and a certificate of insurance.
Doing the work yourself
A person who owns and lives in a unit of a 1- to 4-unit dwelling can get a permit to do their own construction work, with a valid photo ID.10
More
An owner who lives in a single-family home can do their own plumbing or mechanical work but may not work on gas-fired heating equipment. Corporations, LLCs and partnerships cannot get owner permits. An owner who builds or improves more than one property in 24 months needs a state residential building contractor or remodeler license.
Sources
10 official pages, checked November 6, 2026
- HVAC Class A or B license · City of Minneapolis · checked 2026-11-06
- License Application: Trades (last updated 7/30/26) · City of Minneapolis Licenses and Consumer Services · checked 2026-11-06
- Gas fitter license · City of Minneapolis · checked 2026-11-06
- Trade licenses · City of Minneapolis · checked 2026-11-06
- Competency cards · City of Minneapolis · checked 2026-11-06
- Mechanical contractor bond requirements · Minnesota Department of Labor and Industry · checked 2026-11-06
- Sec. 326B.805 MN Statutes · Minnesota Office of the Revisor of Statutes · checked 2026-11-06
- Residential contractor FAQs · Minnesota Department of Labor and Industry · checked 2026-11-06
- Electrical contractor licensing basics · Minnesota Department of Labor and Industry · checked 2026-11-06
- Construction permit applicants · City of Minneapolis · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research