licenserules

Solar installer · Wichita, KS

Solar installer license requirements in Wichita, Kansas

Everything a solar installer needs to work legally in Wichita: the Kansas state rule and the local licenses. Checked November 6, 2026 from 4 official sources.

What does a solar installer need to work in Wichita?

You need one license, from Wichita. Kansas has no state license for this trade.

Wichita has 2 license types that cover this trade. You need only the one that fits your work. Each is described below.

Wichita fee
$50–$360by license type
Wichita bond
None listed
Kansas bond
None listed
Insurance
Proof required

Steps to work as a solar installer in Wichita

  1. 1

    Get a certificate of insurance

    The minimums depend on which license you get. They are listed in each license below.

  2. 2

    Apply for your Wichita license

    Apply for the one that fits your work.

    What the application needs

  3. 3

    Pull a permit for each job

    The contractor license application names the people authorized to obtain permits and request inspections for the company.34

    More

    MABCD warns that a contractor who asks the owner to pull the permit is a red flag.

The 2 Wichita license types (you need one)

MABCD general contractor license (Class A, B, C, D and specialty classes) General contractorResidential builderRooferPool and spa contractorDemolition contractorSolar installer Fee$50 Bond—

Who needs it

Building and general contractors working in Wichita, unincorporated Sedgwick County and the small cities in MABCD's jurisdiction.12

More

Specialty general licenses cover cell towers, fire sprinklers, roofing and/or siding, swimming pools, wrecking, solar and work not otherwise classified. The Class D residential maintenance license applies in the Wichita jurisdiction only.

What you need

  • The company must name a Qualified Person who passed a Kansas standard ICC exam with a score of 75 percent or better.1

    More

    An ICC test release form is needed if the exam was not taken in Kansas.

  • The Qualified Person must be an owner or full-time employee and must sign the application with the company officers.13

  • A Certificate of Good Standing from the Kansas Secretary of State is required, except for sole proprietors.1

  • Roofing contractors must give their State of Kansas roofer registration number.1

  • Review can take up to two weeks.1

Fees and bond

New application fee3$50
Class A license (2 years)23$1,000
Class B license (2 years)23$600
Class C residential license (2 years)23$450
Class D residential maintenance license (2 years)23$360
Cell tower, fire sprinkler, roofing, siding, roofing and siding, swimming pool, wrecking or not-otherwise-classified license (2 years, each)3$360

Insurance

General liability insurance of at least $300,000 from an insurer accepted by the State of Kansas, with MABCD as certificate holder.13

More

Workers' compensation and auto insurance certificates are also required, or a notarized exemption form when state law does not require the coverage.

Renewal

General contractor licenses run two years and expire December 31 of every even year, with a grace period through January 31.13

More

Renewals in February add a 25% penalty; after February the penalty is 50% of the license fee.

Apply on the official site
MABCD trade contractor license ElectricianHVAC contractorPlumberSolar installer Fee$360 Bond—

Who needs it

Trade contractors such as electrical, mechanical, air conditioning and heating, plumbing, gas fitter, refrigeration, sheet metal, drain layer, drain cleaner, lawn irrigation, elevator, fire suppression, fire sprinkler, solar, solid fuel, water conditioner and handicap accessibility contractors.12

What you need

  • A trade contractor must have a Master in the trade, with a trade certificate application.1

  • The same insurance, Certificate of Good Standing and application signature rules apply as for general contractors.1

Fees and bond

Trade contractor license (2 years, most trades)2$360

Insurance

General liability insurance of at least $300,000 with MABCD as certificate holder, plus workers' compensation and auto certificates or a notarized exemption.1

Renewal

Trade contractor licenses run two years and expire December 31 of every odd year.12

More

Renewal requires certificates for 12 hours of approved continuing education, six of them code-related in the trade.

Apply on the official site

Hiring a solar installer in Wichita?

What to ask for

the Wichita MABCD general contractor license (Class A, B, C, D and specialty classes) or MABCD trade contractor license, and a certificate of insurance.

Check a Kansas license

Doing the work yourself

A homeowner may get a permit only for a home they own and occupy, using the Homeowner Declaration Form.4

More

For each trade, the owner must either name a licensed subcontractor or pass a homeowner exam (electrical $50; plumbing $25; water heater $25; mechanical by arrangement with the mechanical chief), with 75% needed to pass. If the owner fails a trade exam, a licensed subcontractor must do that work. Owners who do not live in the home must use a licensed contractor.

Sources

4 official pages, checked November 6, 2026
  1. Contractor Licensing · Sedgwick County / Metropolitan Area Building and Construction Department · checked 2026-11-06
  2. Licensing and Permit Fees, Article 1, Section 2 (Table A): MABCD License Fees (rev. 5/8/2019) · Metropolitan Area Building and Construction Department · checked 2026-11-06
  3. MABCD Form #7 Contractor License Application (rev. 10/19/2026) · Metropolitan Area Building and Construction Department · checked 2026-11-06
  4. Do I Need a Permit? · Sedgwick County / Metropolitan Area Building and Construction Department · checked 2026-11-06

Rules change. Confirm with the agency before you bid or start work. How we research