Topeka, KS · Local contractor rules
Contractor license requirements in Topeka, Kansas
What Topeka requires before you work there, on top of Kansas state licensing. Checked November 6, 2026 from 4 official sources.
Do I need a Topeka license to work there?
Yes. You need one Topeka license. Which one depends on the work you do.
The Topeka Development Services Division issues all contractor and trade licenses in the city.1
More
The city says all trades must be licensed and pull permits to work in Topeka.
Topeka has 3 license types. You need only the one that fits your work:
General contractor license (Class A, B and C) For: General contractor, residential builder, roofer Fee$30BondNot listed Trade contractor license (electrical, mechanical, plumbing) For: Electrician, HVAC contractor, plumber FeeNot publishedBondNot listed Master, journeyman and apprentice licenses For: Electrician, HVAC contractor, plumber Fee$0BondNot listedThis is on top of the Kansas state license, if your trade has one. Check your trade
Pick your trade
Find your work below. Each row shows whether you need a Kansas state license and which Topeka license is yours. Open a row for the full checklist.
The city says all trades must be licensed and pull permits to work in Topeka.1
More
Its published contractor lists also include excavation and specialty contractors.
How to start working in Topeka
- 1
Get your Kansas license if your trade needs one
Kansas licenses some trades and not others. The trade list above shows the state rule for yours.
- 2
Get a certificate of insurance
The minimums depend on which license you get. They are listed in each license below.
- 3
Apply for your Topeka license
Apply for the one that fits your work, with City of Topeka Development Services Division.
- General contractor license (Class A, B and C)$30
- Trade contractor license (electrical, mechanical, plumbing)Not published
- Master, journeyman and apprentice licenses$0
- 4
Pull a permit for each job
Building permits are issued by the Building Permit office after plan review.234
More
Plumbing, electrical and mechanical work may each need a separate trade permit, which is issued only to homeowners and licensed trade contractors. Residential work outside a homeowner permit must be done by a contractor licensed in that trade, who must get all required permits before starting.
- 5
Renew on time
Licenses run from the date issued to December 14 and must be renewed each year by December 14 to avoid late fees.
More
Fees are not prorated or refunded. Class A, B and C holders need 8 hours of continuing education each year. Renewals are done online through the city portal.
Details for each Topeka license type
You need only one of these: the one that fits your work.
General contractor license (Class A, B and C) General contractorResidential builderRoofer Fee$30 Bond—
Who needs it
General contractors working in Topeka. Class A is general building with unlimited stories, Class B is building up to three stories, and Class C is residential only.1
More
Roofers must also give their Kansas Attorney General roofer registration certificate number on the application before they can be licensed by the city.
What you need
A passing score of 75% or higher on the ICC exam for the class: exam 550 (Class A), 551 (Class B) or 552 (Class C).1
More
Exams from Prometric, Thomson-Prometric, Experior, NAI-Block and Block may be submitted and are reviewed for compliance.
Instead of an exam, an official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture.1
More
The person with the credentials is the company's Qualifying Party and must work for the company full time.
The application package includes the license application, exam or education certification, a Qualifying Party verification form, a Renovate Right form, general liability and workers' compensation certificates of insurance (or a notarized workers' compensation affidavit if not required), and a certificate of insurance acknowledgement form. Processing can take up to 10 days.1
Fees and bond
Insurance
General liability and workers' compensation certificates must be on file, with City of Topeka Development Services as certificate holder.1
More
A license becomes inactive if a current certificate is not provided. The city pages read do not state minimum coverage amounts.
Renewal
Licenses run from the date issued to December 14 and must be renewed each year by December 14 to avoid late fees.1
More
Fees are not prorated or refunded. Class A, B and C holders need 8 hours of continuing education each year. Renewals are done online through the city portal.
Trade contractor license (electrical, mechanical, plumbing) ElectricianHVAC contractorPlumber Fee— Bond—
Who needs it
What you need
Proof of a passing score of 75% or higher on an exam, a Master Verification form, a Renovate Right form, and general liability and workers' compensation certificates of insurance (or a notarized workers' compensation affidavit if not required).1
Insurance
Renewal
Licenses must be renewed each year by December 14. The designated master or journeyman needs 6 hours of continuing education a year, 3 of them in their trade.1
Master, journeyman and apprentice licenses ElectricianHVAC contractorPlumber Fee$0 Bond—
Who needs it
Individual electrical, mechanical and plumbing workers. Apprentices must be licensed and must work under the direct supervision of a master or journeyman at all times.1
More
Required ratios are 1 to 1 for electrical, 1 to 2 for mechanical and 1 to 1 for plumbing.
What you need
Master and journeyman applicants must show a passing score of 75% or higher from Block, NIA-Block, Experior, Thomson-Prometric or Prometric, plus a notarized time-in-trade form.1
More
Accepted exams include Standard Master and Journeyman Electrical, Standard Unlimited Air Conditioning Master, Standard Air Conditioning Journeyman, Standard Sheet Metal Journeyman, and Standard Master and Journeyman Plumbing with Gas. An ICC exam must be comparable to the standard Prometric exams.
Workers must carry ID and a current City of Topeka license for their trade and show it when an inspector asks, or leave the site.1
Fees and bond
Renewal
Renewal fees apply each year by December 14. Masters and journeymen need 6 hours of continuing education a year, 3 of them in their trade.1
Topeka licenses general contractors (Class A, B and C) and trade contractors, and also licenses individual masters, journeymen and apprentices.1
For homeowners
Can I do the work and pull the permit myself?
Under Chapter 14, section 10.020 of the city code, a homeowner may get a permit to do all construction work on their owner-occupied home. The homeowner must live in the home and do the work personally.2
Check a contractor before you hire
Topeka requires contractors to hold one of the local licenses above and insurance. Ask for a copy of each.
Good to know
A $10 return mail fee is charged to the contractor license if notices or renewals are returned.1
More
Licensing questions go to Development Services, 620 SE Madison, phone 785-368-3905.
The trade contractor application packet and master/journeyman applications are hosted on a file server (s3.amazonaws.com) that returned 403 when its robots.txt was requested, so they were not read and trade license fees are not listed.1
Common questions
Do I need a contractor license to work in Topeka?
Yes. Topeka has 3 license types (General contractor license (Class A, B and C); Trade contractor license (electrical, mechanical, plumbing); Master, journeyman and apprentice licenses). You need the one that fits your work, plus any Kansas license your trade needs.
How much does a Topeka contractor license cost?
It depends on the license type. General contractor license (Class A, B and C): $30 (reinstatement fee if a current insurance certificate is not provided within 30 days). Master, journeyman and apprentice licenses: $0 (first-time license issuance).
Can a homeowner pull a permit in Topeka?
Under Chapter 14, section 10.020 of the city code, a homeowner may get a permit to do all construction work on their owner-occupied home. The homeowner must live in the home and do the work personally.
How long is a Topeka contractor license good for?
Licenses run from the date issued to December 14 and must be renewed each year by December 14 to avoid late fees. Fees are not prorated or refunded. Class A, B and C holders need 8 hours of continuing education each year. Renewals are done online through the city portal.
Sources
4 official pages, checked November 6, 2026
- Contractor Information · City of Topeka · checked 2026-11-06
- Skilled Trades (permits) · City of Topeka · checked 2026-11-06
- Building (permits) · City of Topeka · checked 2026-11-06
- Permit/Licensing Portal · City of Topeka · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research