Itasca, IL · Local contractor rules
Contractor license requirements in Itasca, Illinois
What Itasca requires before you work there, on top of Illinois state licensing. Checked November 6, 2026 from 3 official sources.
Do I need an Itasca license to work there?
Yes. You need one Itasca license. Which one depends on the work you do.
Contractors must register with the Village of Itasca before doing permitted work in the village.1
More
A building permit is not issued until all contractors on the project are registered and bonded.
Itasca has 5 license types. You need only the one that fits your work:
General contractor registration For: General contractor, residential builder Fee$100Bond$10,000 Electrical contractor registration For: Electrician Fee$100Bond$5,000 Roofing contractor registration For: Roofer Fee$100BondNone Trade contractor registration (HVAC, low voltage, paving/concrete, excavator, sign, fence, masonry, other) For: HVAC contractor, concrete contractor, fence contractor Fee$100BondNot listed Plumbing and irrigation contractor registration For: Plumber FeeNot publishedBondNot listedThis is on top of the Illinois state license, if your trade has one. Check your trade
Pick your trade
Find your work below. Each row shows whether you need an Illinois state license and which Itasca license is yours. Open a row for the full checklist.
The form lists a registration for other contractors with a certificate of insurance and the same fee.2
More
It says elevator and carpentry licenses are exempt. Fire alarm, burglar alarm and fire sprinkler contractors need a state license and insurance certificate, with no fee listed.
How to start working in Itasca
- 1
Get your Illinois license if your trade needs one
Illinois licenses some trades and not others. The trade list above shows the state rule for yours.
- 2
Get a surety bond
- General contractor registration$10,000
- Electrical contractor registration$5,000
You pay a yearly premium to a surety company, not the full bond amount. Estimate the cost
- 3
- 4
Apply for your Itasca license
Apply for the one that fits your work, with Village of Itasca Community Development Department.
- General contractor registration$100
- Electrical contractor registration$100
- Roofing contractor registration$100
- Trade contractor registration (HVAC, low voltage, paving/concrete, excavator, sign, fence, masonry, other)$100
- Plumbing and irrigation contractor registrationNot published
- 5
Pull a permit for each job
The building permit application lists every contractor on the job, and the village checks each one's insurance, license, bond and registration.13
More
The applicant must be the owner of record, have a contractual or beneficial interest in the property, or be the owner's authorized agent. A permit expires 12 months after it is issued, and work must start within six months.
- 6
Renew on time
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.
Details for each Itasca license type
You need only one of these: the one that fits your work.
General contractor registration General contractorResidential builder Fee$100 Bond$10,000
What you need
Fees and bond
A $10,000 code compliance bond.
Renewal
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.2
Electrical contractor registration Electrician Fee$100 Bond$5,000
Who needs it
Electricians doing permitted work in the village.2
What you need
Fees and bond
A $5,000 code compliance bond.
Renewal
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.2
Roofing contractor registration Roofer Fee$100 BondNone
Who needs it
Roofers doing permitted work in the village.2
Fees and bond
The form lists no bond for roofers.
Renewal
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.2
Trade contractor registration (HVAC, low voltage, paving/concrete, excavator, sign, fence, masonry, other) HVAC contractorConcrete contractorFence contractor Fee$100 Bond—
Who needs it
HVAC, low voltage electrical, paving/concrete, excavating, sign, fence, masonry and other contractors doing permitted work in the village.2
What you need
A completed application and a certificate of insurance. The form lists no license or bond for these trades.2
Renewal
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.2
Plumbing and irrigation contractor registration Plumber Fee— Bond—
What you need
For each permit, a letter of intent on the license holder's business letterhead, signed by the holder (with corporate seal if incorporated, or notarized if not), and a copy of the signed proposal before the permit is released.1
Renewal
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.2
Each registration covers one trade. The form lists general contractors, roofers, HVAC, electricians, low voltage electricians, paving/concrete, excavators, sign, fence and masonry contractors, plumbing and irrigation contractors, fire and burglar alarm and fire sprinkler contractors, and other contractors.2
For homeowners
Can I do the work and pull the permit myself?
Itasca does not say on the pages we read. Ask the building department before you start.
Check a contractor before you hire
Itasca requires contractors to hold one of the local licenses above and a bond and insurance. Ask for a copy of each.
Good to know
The application form lists the Community Development Department at 550 W. Irving Park Road, phone 630-773-5568, email commdev@itasca.com.2
Common questions
Do I need a contractor license to work in Itasca?
Yes. Itasca has 5 license types (General contractor registration; Electrical contractor registration; Roofing contractor registration; Trade contractor registration (HVAC, low voltage, paving/concrete, excavator, sign, fence, masonry, other); Plumbing and irrigation contractor registration). You need the one that fits your work, plus any Illinois license your trade needs.
How much does a Itasca contractor license cost?
It depends on the license type. General contractor registration: $100 (full-year registration). Electrical contractor registration: $100 (full-year registration). Roofing contractor registration: $100 (full-year registration). Trade contractor registration (HVAC, low voltage, paving/concrete, excavator, sign, fence, masonry, other): $100 (full-year registration).
Do Itasca contractors need a bond?
Yes, and the amount depends on the license type. General contractor registration: $10,000 bond. Electrical contractor registration: $5,000 bond.
How long is a Itasca contractor license good for?
All contractor registrations expire December 31 of the year issued. A half-year registration is sold after June 30 for a reduced fee.
Sources
3 official pages, checked November 6, 2026
- Contractor Registration Requirements · Village of Itasca · checked 2026-11-06
- Contractor Registration (application form) · Village of Itasca Community Development Department · checked 2026-11-06
- Building Permit Application (rev. 11/3/2021) · Village of Itasca Community Development Department · checked 2026-11-06
Rules change. Confirm with the agency before you bid or start work. How we research